What We Inspect During a Caravan Gas Certificate Inspection

At Caravan Roadworthy and Gas Certificate Bribie Island, we believe that every Caravan Gas Certificate inspection should be completed thoroughly, not rushed. Your caravan's LPG gas system is one of the most important safety systems in your caravan, and every component must operate safely and comply with current Australian Standards.

Our Caravan Gas Certificate inspections are completed using professional testing equipment and industry-approved inspection procedures to ensure your gas installation is safe for you and your family.

Whether you own a touring caravan, off-road caravan, pop-top, camper trailer or hybrid caravan, every gas installation receives the same attention to detail.

LPG Gas Cylinders

The inspection begins with the LPG cylinders.

We inspect the condition of each gas bottle to ensure it is suitable for use, securely mounted and correctly restrained. The cylinder compartment is checked for damage, corrosion and ventilation, while bottle mounting brackets and retaining straps are inspected to ensure the cylinders cannot move during transport.

We also check that the correct type of cylinders have been fitted and that the installation complies with current gas safety requirements.

Gas Regulators and Automatic Changeover Valves

The gas regulator controls the pressure supplied to every appliance throughout your caravan. A damaged or faulty regulator can affect appliance performance and may create unsafe operating conditions.

During the inspection we examine:

• Gas regulator condition

• Mounting security

• Vent orientation

• Signs of corrosion

• Water damage

• Regulator age

• Automatic changeover valves (where fitted)

• Correct gas pressure

If a regulator shows signs of deterioration or damage, replacement may be recommended to ensure the safe operation of your caravan's LPG system.

Copper Gas Pipework

Every section of copper gas pipe is visually inspected from the gas cylinders through to each appliance.

We check for:

• Physical damage

• Crushing

• Kinks

• Abrasion

• Corrosion

• Poor workmanship

• Correct support brackets

• Secure mounting

• Proper protection where pipework passes through walls or chassis members

Road vibration can eventually damage poorly supported gas pipework, making this an important part of every Caravan Gas Certificate inspection.

Flexible Gas Hoses

Flexible gas hoses have a limited service life and should always be inspected regularly.

We check for:

• Cracking

• Weathering

• UV deterioration

• Abrasion

• Loose fittings

• Damage from rodents

• Heat damage

• Correct installation

• Hose routing

Any hose showing signs of deterioration should be replaced immediately.

Gas Isolation Valves

Every gas appliance should have an accessible isolation valve.

We inspect each valve for:

• Correct operation

• Accessibility

• Secure mounting

• Gas leaks

• Correct identification

• Overall condition

Isolation valves allow individual appliances to be safely isolated for servicing or repairs and are an important part of any compliant LPG installation.

Gas Leak Testing

One of the most critical parts of every Caravan Gas Certificate inspection is testing the complete gas installation for leaks.

Using specialised testing equipment, we test the entire gas system under pressure to confirm that no leaks are present anywhere within the installation.

Even the smallest gas leak can become dangerous if left undetected. Our pressure testing procedures help identify leaks that cannot be seen during a visual inspection.

Should a leak be detected, we will explain exactly where the fault has been found and discuss the most suitable repair options.

Appliance Testing

Every gas appliance fitted to your caravan is individually tested.

This may include:

• Gas cooktops

• Ovens

• Grill burners

• Three-way refrigerators

• Hot water systems

• Space heaters

• External bayonet outlets

• Barbecue connections

Each appliance is checked for:

• Safe ignition

• Correct flame pattern

• Stable operation

• Flame failure device operation

• Burner condition

• Gas supply

• General performance

Proper appliance operation not only improves safety but also ensures efficient gas consumption while travelling.

Ventilation Requirements

Correct ventilation is essential in every caravan.

Gas appliances require adequate airflow to operate safely, while ventilation openings allow fresh air into the caravan and assist with the safe dispersal of combustion gases.

During the inspection we assess:

• Upper ventilation openings

• Lower ventilation openings

• Appliance ventilation

• Cylinder compartment ventilation

• Obstructions

• Modifications that may affect airflow

Blocked or altered ventilation can create dangerous conditions and may result in the gas installation not complying with Australian Standards.

Compliance Plates and Gas Labels

We inspect the caravan's gas compliance information to ensure appliances and installations are correctly identified.

This includes checking:

• Gas compliance plates

• Appliance data plates

• Manufacturer identification

• Gas warning labels

• Safety information

• Appliance certification

These labels provide important information relating to the installation and assist with future servicing and inspections.

General Installation Quality

Experience tells us that not every gas installation has been completed to the same standard.

We carefully assess the overall workmanship of the installation, looking for signs of previous repairs, modifications or non-compliant alterations.

This includes checking:

• Pipe support spacing

• Fitting quality

• Appliance mounting

• Protection against vibration

• Chafing points

• General workmanship

• Previous repair quality

• Signs of DIY modifications

Poor-quality repairs or incorrect modifications can significantly affect the safety of the LPG system.

Common Reasons a Caravan May Fail a Gas Certificate Inspection

Although every caravan is different, some faults are seen more regularly than others.

Common issues include:

• Gas leaks

• Perished flexible hoses

• Damaged regulators

• Loose gas fittings

• Incorrect gas pressure

• Corroded pipework

• Missing isolation valves

• Poor ventilation

• Faulty appliance flame failure devices

• Non-compliant modifications

• Damaged appliance connections

• Unsecured gas bottles

• Missing compliance labels

• Unsafe workmanship

• General wear and deterioration

Where practical, we will always explain the fault and discuss the most suitable repair options before any work is undertaken.

A Thorough Inspection You Can Trust

At Caravan Roadworthy and Gas Certificate Bribie Island, we don't believe in simply ticking boxes. Every Caravan Gas Certificate inspection is completed carefully, professionally and with your family's safety in mind.

Our goal is to ensure your caravan or camper trailer has a safe, reliable LPG system that complies with current Australian Standards, giving you confidence whether you're heading away for a weekend on Bribie Island or travelling around Australia.

When you book with us, you're choosing a local family business that specialises in caravans and camper trailers and provides honest advice, quality workmanship and the convenience of a 100% Mobile To You service.